Walnut bathroom vanity – You can create a modern and attractive look with walnut vanity that gives the illusion of more space on the floor while providing an exceptionally clean and modern look to the bathroom. Rough on hot and cold water supply lines and drain pipes to each of the sinks. The manufacturer’s instructions will recommend a height of the floor of the supply lines and pipes and a precise distance between the centers of the pipes. Closing the wall by fixing drywall to the wooden posts and finishing the seams with joint compound and paint to match your decor.
Mark the wall with the location of the toilet mounting bracket according to the manufacturer’s instructions, which will call a specific height and separation distance from the wall anchors. Drill a pilot hole for the anchors. Place the leveling hole in the bracket over the first pilot hole and press the wall anchor through the hole in the bracket and into the hole in the wall. Lift the other end of the bracket and press a second wall anchor through the leveling hole and then the hole in the wall.
12 Photos Gallery of: Ideas To Install Walnut Bathroom Vanity
Place a carpenter level on the top edge of the mounting bracket. Tighten the wall anchors so that the mounting bracket is level. Push the vanity into the wall and drop it gently so that its integrated support bracket is installed on the mounting bracket. Open the doors of bathroom furniture and look inside and on the top to locate a row of holes drilled inside the toilet. Push the vanity so that these holes are aligned to match those of the mounting bracket.